top of page
225_preparat-czyszczco--odtuszczajacy-og

Downloads

GREINPLAST ACO

Cleaning and degreasing, general-purpose preparation

Used to remove unhardened foams and polyurethane glues, to clean valves in application containers and guns. The reparation does not contain lubrication additives, and therefore it may be used to degrease surfaces resistant to solvents (metals, ceramics) before gluing, sealing or other works requiring degreasing.

Packaged in 500 ml containers.

​

PREPARATION

Apply the attached spraying head onto the valve. Spray onto fresh stain of foams or polyurethane glues. When cleaning a stained outlet in a polyurethane foam container, carefully spray the preparation onto the valve and gun adaptor. Remove stains with a dry cloth. When cleaning the gun, detach it from the polyurethane foam container, and remove the remaining foam by pressing the gun trigger. Next, spray Greinplast ACO onto the gun socket. Remove the spraying head and place the preparation in the gun socket, then press the gun trigger again. Repeat until the gun is completely clean.

​

​

Recommendations and remarks

Application temperature between +5°C and +30°C. Before use, make yourself familiar with warnings and OHS recommendations. Do not use the preparation in enclosed spaces and at temperatures exceeding +35°C Do not mix with other chemical substances. Do not leave Greinplast ACO attached to the gun, as this may cause damage to its sealing. Do not disassemble the gun to clean it.
Information contained in the manual help ensure the optimal use of the product, however, it does not create any legal liability of the Manufacturer, due to the fact that the conditions of use remain outside of its control.
 

bottom of page